BBJBJ - DIP SEAL PLASTIC TYPE I
- MSDS: BBJBJ
- Manufacturer: DIP SEAL PLASTICS INC
- Product Name: DIP SEAL PLASTIC TYPE I
- National Stock Number: 6850-00F001219
Product Identification
Product ID:DIP SEAL PLASTIC TYPE I
MSDS Date:01/01/1987
FSC:6850
NIIN:00F001219
MSDS Number: BBJBJ
Responsible Party
ROCKFORD, IL 61101
Emergency Phone: (815) 398-3533
Info Phone: (815) 398-3533
Cage: 29437
Contractor
Telephone: (815) 398-3533
Cage: 29437
Ingredients
OIL PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY PARAFFINIC
CAS: 64742-65-0
RTECS: PY8038500
PARAFFIN WAX
CAS: 8002-74-2
RTECS: RV0350000
OSHA PEL 2 MG/M3 (FUME)
ACGIH TLV: 2 MG/M3 (FUME); 9192
PARAPLEX G-90, FATTY ACID, SOYBEAN OIL, EPOXIDIZED
CAS: 8013-07-8
RTECS: LH8010000
2,6-DI-TERT-BUTYL-P-CRESOL
CAS: 128-37-0
RTECS: GO7875000
OSHA PEL 10 MG/M3
ACGIH TLV: 10 MG/M3; 9192
ETHYL CELLULOSE PLASTIC
CAS: 9004-57-3
RTECS: FJ5950500
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EXCESS TEMPERATURES MAY PRODUCE IRRITATION.
First Aid
First Aid:PROPER PROCEDURE FOR HOT OIL BURNS.
Fire Fighting
Flash Point Method:COC
Flash Point:395F
Extinguishing Media:WATER FOG, CO2, DRY CHEMICAL & FOAM.
Fire Fighting Procedures:PRODUCT MELTS AT 175F.
Accidental Release
Spill Release Procedures:DISAPATE HEAT WITH WATER FOG OR OTHER SUITABLE
METHOD AND MECHANICALLY CLEAN-UP.
Handling
Handling and Storage Precautions:STORE IN COOL DRY PLACE.
Other Precautions:MELTED DIP SEAL WILL PRODUCE SEVERE BURNS IF ON BODY.
Exposure Controls
Ventilation:LOCAL EXHAUST/MECHANICAL
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>400F
Vapor Pres:<0.1
Vapor Density:>10
Spec Gravity:1.0544
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:<0.15
Appearance and Odor:AMBER SOLID-LUBE OIL ODOR.
Percent Volatiles by Volume:0.1
Stability
Stability Indicator/Materials to Avoid:YES
NORMALLY HAZARDOUS OR INCOMPATIBLE W/HYDROCARBON OILS.
Stability Condition to Avoid:OPEN FLAME
Hazardous Decomposition Products:CO2, CO, SMOKE & SOOT
Conditions to Avoid Polymerization:DIPPING TEMPERATURE 350F.
Disposal
Waste Disposal Methods:RECLAIM OR HAVE REMOVED BY DISPOSAL SERVICE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.